[1] |
吴红星, 赵凯岐, 王胜劲 , 等. 一种新型混合励磁开关磁阻电机[J]. 电工技术学报, 2013,28(7):56-63.
|
|
Wu Hongxing, Zhao Kaiqi, Wang Shengjin , et al. A novel hybrid excitation switched reluctance motor[J]. Transactions of China Electrotechnical Society, 2013,28(7):56-63.
|
[2] |
周扬忠, 毛杰 . 基于有效磁链概念的永磁同步电动机新型定子磁链滑模观测器[J]. 中国电机工程学报, 2013,33(12):152-158.
|
|
Zhou Yangzhong, Mao Jie . A novel stator flux sliding mode observer for permanent magnet synchronous motor based on effective flux concept[J]. Proceedings of the Chinese Society for Electrical, 2013,33(12):152-158.
|
[3] |
何志明, 廖勇, 向大伟 . 定子磁链观测器低通滤波器的改进[J]. 中国电机工程学报, 2008,28(18):61-65.
|
|
He Zhiming, Liao Yong, Xiang Dawei . Improvement of low-pass filter for stator flux observer[J]. Proceedings of the Chinese Society for Electrical, 2008,28(18):61-65.
|
[4] |
Hu J, Wu B . New integration algorithms for estimating motor flux over a wide speed range[J]. IEEE Transactions on Power Electronics, 1998,13(5):969-977.
doi: 10.1109/TPEL.63
|
[5] |
De Carvalho F V, Pinto J O P, Da Silva L E B, et al. A DSP based torque meter for induction motors[C]. Proceedings of Annual Conference of IEEE Industrial Electronics Society, Acapulco, Mexico, 2003.
|
[6] |
Pinto J O, Bose B K, Da Silva L E B . A stator-flux- oriented vector-controlled induction motor drive with space-vector PWM and flux-vector synjournal by neural networks[J]. IEEE Transactions on Industry Applications, 2001,37(5):1308-1318.
doi: 10.1109/28.952506
|
[7] |
Bose B K, Patel N R . A programmable cascaded low-pass filter based flux synjournal for a stator flux oriented vector controlled induction motor drive[J]. IEEE Transactions on Industrial Electronics, 1997,44(1):140-143.
doi: 10.1109/41.557511
|
[8] |
Chun T, Choi M, Bose B K . A novel startup scheme of stator-flux-oriented vector-controlled induction motor drive without torque jerk[J]. IEEE Transactions on Industry Applications, 2003,39(3):776-782.
doi: 10.1109/TIA.2003.811779
|
[9] |
何志明, 廖勇, 向大伟 . 基于改进层叠式可编程低通滤波器的磁链观测方法[J]. 电工技术学报, 2008,23(4):53-58.
|
|
He Zhiming, Liao Yong, Xiang Dawei . Flux chain observation method based on improved cascaded programmable low pass filter[J]. Transactions of China Electrotechnical Society, 2008,23(4):53-58.
|
[10] |
冯江华, 许峻峰 . 基于定子磁链自适应观测的永磁同步电机直接转矩控制系统[J]. 中国电机工程学报, 2006,26(12):122-127.
|
|
Feng Jianghua, Xu Junfeng . Direct torque control system of permanent magnet synchronous motor based on stator flux adaptive observation[J]. Proceedings of the Chinese Society for Electrical, 2006,26(12):122-127.
|
[11] |
陆文斌, 姚文熙, 吕征宇 . 基于改进闭环磁链观测器的感应电机无速度矢量控制[J]. 电工技术学报, 2013,28(3):148-153.
|
|
Lu Wenbin, Yao Wenxi, Lv Zhengyu . Speed sensorless control of induction motor based on improved closed-loop flux observer[J]. Transactions of China Electrotechnical Society, 2013,28(3):148-153.
|
[12] |
黄进, 赵力航, 刘赫 . 基于二阶滑模与定子电阻自适应的转子磁链观测器及其无速度传感器应用[J]. 电工技术学报, 2013,28(11):54-61.
|
|
Huang Jin, Zhao Lihang, Liu He . Rotor Flux observer based on second-order sliding mode and stator resistance and its application with speed sensorless[J]. Transactions of China Electrotechnical Society, 2013,28(11):54-61.
|
[13] |
张猛, 肖曦, 李永东 . 基于扩展卡尔曼滤波器的永磁同步电机转速和磁链观测器[J]. 中国电机工程学报, 2007,27(36):36-40.
|
|
Zhang Meng, Xiao Xi, Li Yongdong . Permanent magnet synchronous motor speed and flux observer based on extended kalman filter[J]. Proceedings of the Chinese Society for Electrical, 2007,27(36):36-40.
|
[14] |
王洪艳, 窦曰轩, 尔桂花 . 直接转矩控制系统定子磁链的神经网络观测方法[J]. 中小型电机, 2001,28(1):17-20.
|
|
Wang Hongyan, Dou Yuexuan, Er Guihua . Neural network observation method of stator flux in direct torque control system[J]. Journal of Small and Medium Electric Machines, 2001,28(1):17-20.
|
[15] |
Luiz E B da Silva, Bimal K Bose, Joao O P Pinto . Recurrent-neural-network-based implementation of a programmable cascaded low-pass filter used in stator flux synjournal of vector-controlled induction motor drive[J]. IEEE Transactions on Industrial Electronics, 1999,46(3):662-665.
doi: 10.1109/41.767076
|
[16] |
燕忠 . 基于蚁群优化算法的若干问题的研究[D]. 南京:东南大学, 2005.
|
[17] |
杨东民, 陈敏, 吴庆朝 . 基于KPCA与MPSO-BP注射成型工艺参数优化[J]. 工程塑料应用, 2015,43(12):42-47.
|
|
Yang Dongmin, Chen Min, Wu Qingchao . Optimization of process parameters based on KPCA and MPSO-BP injection molding[J]. Journal of Engineering Plastics, 2015,43(12):42-47.
|