电气工程学报

电气工程学报 ›› 2016, Vol. 11 ›› Issue (6): 33-39.doi: 10.11985/2016.06.006

• 工程技术 • 上一篇    下一篇

基于104规约SCADA采集的自动配置研究

彭代文,冯剑侠,薜超   

  1. 南瑞集团公司 北京 102200
  • 收稿日期:2015-05-22 出版日期:2016-06-25 发布日期:2019-12-31
  • 作者简介:彭代文 男 1982年生,高级工程师,主要从事配电自动化、信息化技术方面的工作。|冯剑侠 男 1982年生,工程师,主要从事配电自动化技术方面的工作。

Research on Automatic Configuration of SCADA Based on 104 Protocol

Peng Daiwen,Feng Jianxia,Xue Chao   

  1. NARI Group Corporation Beijing 102200 China
  • Received:2015-05-22 Online:2016-06-25 Published:2019-12-31

RichHTML

2

PDF

966

摘要：

为了降低配电自动化工程实施过程中主站与终端之间的对点调试复杂性,研究了基于104规约的SCADA自动配置方案。本文简要介绍了104规约并分析了规约的特性;深入分析了目前配电自动化工程中主站与终端的点号配置、调试和数据采集过程;基于面向对象的思想,提出了基于104规约的主站与终端的SCADA自动配置方案,并对关键技术的实现进行了研究;最后分析了工程应用的成效。

关键词: 面向对象, 104规约, 自动配置, 配电自动化

Abstract:

In order to reduce debugging complexity between the master station and the terminal in the distribution automation project, the automatic configuration of SCADA based on 104 protocol is deeply researched on in the paper. The 104 protocol is briefly introduced and the characteristics of the 104 protocol are analyzed; the process of point configuration, debugging and data acquisition between the master station and the terminal of distribution automation are deeply analyzed. Based on the object-oriented method, a SCADA automatic configuration solution based on 104 protocol is put forward, and the realization of the key technologies is described in the paper.

Key words: Object-oriented, 104 protocol, automatic configuration, DMS

中图分类号: