[1] |
张帆, 段雄英, 吕洋 , 等. 选相投切对特高压变压器操作冲击绝缘的影响分析[J]. 电力自动化设备, 2018,38(11):204-210.
|
|
Zhang Fan, Duan Xiongying, Lü Yang , et al. Analysis of impacts of controlled switching on switching impulse insulation of UHV transformer[J]. Electric Power Automation Equipment, 2018,38(11):204-210.
|
[2] |
陈淑仙, 王渊涛, 杨文锋 , 等. 树脂基复合材料修补片固化过程中的温度场[J]. 西南交通大学学报, 2014,49(5):869-874.
doi: 10.3969/j.issn.0258-2724.2014.05.020
|
|
Chen Shuxian, Wang Yuantao, Yang Wenfeng , et al. Analysis of temperature field of resin matrix composite patches during curing process[J]. Journal of Southwest Jiaotong University, 2014,49(5):869-874.
doi: 10.3969/j.issn.0258-2724.2014.05.020
|
[3] |
田秋实, 唐庆如, 王渊涛 , 等. 不同降温速率条件下复合材料修补片固化温度场和热应力分析[J]. 硅酸盐通报, 2015,34(S1):181-185.
|
|
Tian Qiushi, Tang Qingru, Wang Yuantao , et al. Analysis of temperature field and the thermal stress of resin matrix composite patches in different cooling rate during curing process[J]. Bulletin of the Chinese Ceramic Society, 2015,34(S1):181-185.
|
[4] |
Hahn H J, Pagano N J . Curing stresses in composite laminates[J]. Journal of Composite Materials, 1975,9(1):91-106.
|
[5] |
Griffin O H . Three dimensional curing stresses in symmetric cross-ply laminates with temperature-dependent properties[J]. Journal of Composite Materials, 1983,17(17):449-463.
|
[6] |
李君, 姚学锋, 刘应华 , 等. 复合材料固化过程中温度及应变场分布的解析解[J]. 清华大学学报, 2009,49(5):767-771.
|
|
Li Jun, Yao Xuefeng, Liu Yinghua , et al. Temperature fields and strains in composite laminates during curing[J]. J. Tsinghua Univ., 2009,49(5):767-771.
|
[7] |
S Huiqiang, Q Fei, X Guofeng, et al. Characterization of thermal and curing behaviors of epoxy molding compounds[C]// 2014 15th International Conference on Electronic Packaging Technology,Chengdu, 2014: 369-372.
|
[8] |
吴燕 . 基于ANSYS的汽车继电器热分析[D]. 天津:河北工业大学, 2015.
|
[9] |
Zhan Y, Goplen B, Sapatnekar S S, et al. Electrothermal analysis and optimization techniques for nanoscale integrated circuits[C]// 2006 Asia and South Pacific Conference on Design Automation. IEEE, 2006: 4.
|
[10] |
陆佳政, 刘毓, 吴传平 , 等. 输电线路山火卫星监测与告警算法研究[J]. 中国电机工程学报, 2015,35(21):5511-5519.
doi: 10.13334/j.0258-8013.pcsee.2015.21.015
|
|
Lu Jiazheng, Liu Yu, Wu Chuanping , et al. Study on satellite monitoring and alarm calculation algorithm of wild fire near transmission lines[J]. Proceedings of the CSEE, 2015,35(21):5511-5519.
doi: 10.13334/j.0258-8013.pcsee.2015.21.015
|
[11] |
张师帅 . 计算流体动力学及其应用–CFD 的软件原理与应用[M]. 武汉: 华中科技大学出版社, 2011.
|
[12] |
陶文铨 . 数值传热学[M]. 西安: 西安交通大学出版社, 2001.
|
[13] |
李伟力, 付敏, 周封 , 等. 基于流体相似理论和三维有限元法计算大中型异步电动机的定子三维温度场[J]. 中国电机工程学报, 2000(5):15-18,22.
|
|
Li Weili, Fu Min, Zhou Feng , et al. Calculation of 3D stator temperature field of large and medium scale asynchronous motor on the basis of theory of fluid similarity and 3D FEM[J]. Proceedings of the CSEE, 2000(5):15-18,22.
|