电气工程学报 ›› 2018, Vol. 13 ›› Issue (7): 31-39.doi: 10.11985/2018.07.005

• • 上一篇    下一篇

有触点电器性能退化评估测试系统设计

刘树鑫,刘子春,王园园   

  1. 沈阳工业大学电器新技术与应用研究所 沈阳 110870
  • 收稿日期:2017-10-15 出版日期:2018-07-25 发布日期:2019-11-29
  • 作者简介:刘树鑫 男 1982年生,博士,讲师,研究方向为电器智能化。|刘子春 男 1993年生,硕士研究生,研究方向为电器智能化。
  • 基金资助:
    辽宁省科技厅博士启动基金项目(201501086)

Design of Evaluation Test System for Performance Evaluation of Contact Electrical Apparatus

Liu Shuxin,Liu Zichun,Wang Yuanyuan   

  1. Shenyang University of Technology Shenyang 110870 China
  • Received:2017-10-15 Online:2018-07-25 Published:2019-11-29

摘要:

在开关电器中有触点电器应用十分广泛,其运行状态会直接影响整个电力系统,所以有触点电器性能退化评估意义重大。本文对有触点电器性能退化评估测试系统进行设计,以交流接触器为例搭建的测试系统,采用NI高速数据采集卡,实现8通道同时采集,利用Labview虚拟仪器技术,通过串行通信对下位机进行实时控制,实现自动控制试验过程并对交流接触器通断过程中的线圈电压及电流、触头电压及电流波形进行监测与记录。由采集到的精确波形数据可以提取出反映交流接触器性能退化的特征参量,为后续性能退化评估研究工作奠定了基础。

关键词: 交流接触器, 虚拟仪器技术, 实时控制, 性能退化

Abstract:

Contact electrical appliances are widely used in the switch electrical appliances, and their operating status will directly affect the operation of the entire power system. So the performance evaluation of contact electrical appliances is significant. This paper investigated a contact electrical performance degradation evaluation test system. Take AC contactor as an example, the use of NI high-speed data acquisition card, which achieves simultaneous acquisition of 8 channels. And Labview virtual instrument technology is used to real-time control of the slave computer through the serial communication, so that monitoring and recording the accurate voltage and current waveform data of the coil and main contact during the test process of AC contactor. The characteristic parameters which reflect the degradation of AC contactor can be extracted from the collected accurate waveform data, which lays a foundation for the further research on performance degradation assessment.

Key words: AC contactor, virtual instrument technology, real-time control, performance degradation

中图分类号: