Design of Emergency Power Supply Charger Based on Field-Programmable Gate Array

Abstract

Abstract:

DSP was used as the processor for the traditional emergency power charger but the real-time control is poor. Therefore the three-phase PWM rectifier with the control chip of EP3C25E144C8N\FPGA is designed to solve this problem. This rectifier is designed with the double loop feedforward decoupling control based on SVPWM, multi-step constant current charging and VHDL language programme. The simulation and the result of the experiment results verify the excellence of the three-phase PWM rectifier.

Key words: Charger, PWM rectifier, field-programmable gate array, battery

CLC Number:

TN86

Fan Bingjian,Jia Wenchao,Wang Bo,Huang Yong. Design of Emergency Power Supply Charger Based on Field-Programmable Gate Array[J]. Journal of Electrical Engineering, 2015, 10(6): 78-83.

Figures/Tables 17

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

APP. Fig.

References 10

[1]	赵馨, 佟首峰 . 基于FPGA的精跟踪系统[J]. 仪器仪表学报, 2011,32(7):21-25.
	Zhao Xin, Tong Shoufeng . Fine tracking system based on FPGA[J]. Chinese Journal of Scientific Instrument, 2011,32(7):21-25.
[2]	关守平, 尤富强, 董国伟 . 基于FPGA的高速数据采集系统设计[J]. 控制工程, 2013,20(5):970-975.
	Guan Shouping, You Fuqiang, Dong Guowei . Design and development of the high-speed data acquisition system based on FPGA[J]. Control Engineering of China, 2013,20(5):970-975.
[3]	杨海钢, 孙嘉斌, 王慰 . FPGA器件设计技术发展综述[J]. 电子与信息学报, 2010,32(3):714-727. doi: 10.3724/SP.J.1146.2009.00751 pmid: 31882987
	Yang Haigang, Sun Jiabin, Wang Wei . An overview to FPGA device design technologies[J]. Journal of Electronics&Information Technology, 2010,32(3):714-727. doi: 10.3724/SP.J.1146.2009.00751 pmid: 31882987
[4]	梁营玉, 刘建政, 许杏桃 . 基于电源电流和负载电流检测的前馈加反馈的三相四线制APF控制策略[J]. 电力自动化设备, 2015,35(1):94-100.
	Liang Yingyu, Liu Jianzheng, Xu Xingtao . Feedforward-feedback control strategy based on detection of power current and load current for three-phase four-wire APF[J]. Electric Power Automation Equipment, 2015,35(1):94-100.
[5]	王恩德, 黄声华 . 三相电压型PWM整流的新型双闭环控制策略[J]. 中国电机工程学报, 2012,32(15):24-30.
	Wang Ende, Huang Shenghua . A novel double closed loops control of the three-phase voltage-sourced pwm rectifier[J]. Proceedings of the CSEE, 2012,32(15):24-30.
[6]	孟大鹏, 郑帅 . 基于三闭环控制的PWM整流充电技术的研究[J]. 电力电子技术, 2013,47(7):22-24.
	Meng Dapeng, Zheng Shuai . Research on PWM rectifier and charging technique based on three closed-loop controlling[J]. Power Electronics, 2013,47(7):22-24.
[7]	王崇武, 李宏 . 空间矢量PWM整流器仿真研究[J]. 计算机仿真, 2010,27(5):252-256.
	Wang Chongwu, Li Hong . The Investigation on the PWM rectifier using the SVPWM[J]. Computer Simulation, 2010,27(5):252-256.
[8]	汪万伟, 尹华杰, 管霖 . 双闭环矢量控制的电压型PWM整流器参数整定[J]. 电工技术学报, 2010,25(2):67-72.
	Wang Wanwei, Yin Huajie, Guan Lin . Parameter setting for double closed-loop vector control of voltage source PWM rectifier[J]. Transactions of China Electrotechnical Society, 2010,25(2):67-72.
[9]	吴昇, 王清灵 . 基于可逆PWM整流器的蓄电池充放电装置[J]. 电源技术, 2010,34(10):62-64.
	Wu Sheng, Wang Qingling . Battery charge and discharge device based on reversible PWM rectifier[J]. Chinese Journal of Power Sources, 2010,34(10):62-64.
[10]	李武峰, 罗小英, 边孝成 , 等. 电动汽车蓄电池充放电装置研究[J]. 电力电子技术, 2013,47(8):89-91.
	Li Wufeng, Luo Xiaoying, Bian Xiaocheng , et al. Research on charging and discharging device of electric vehicle battery[J]. Power Electronics, 2013,47(8):89-91.

[1]	K. N. Mude, K. Aditya. Comprehensive Review and Analysis of Two-element Resonant Compensation Topologies for Wireless Inductive Power Transfer Systems [J]. Chinese Journal of Electrical Engineering, 2019, 5(2): 14-31.
[2]	XIONG Rui, MA Suxiao, YANG Ruixin, CHEN Zeyu. Thermo-mechanical Influence and Analysis of External Short Circuit Faults in Lithium-ion Battery [J]. Journal of Mechanical Engineering, 2019, 55(2): 115-125.
[3]	XIONG Rui, WANG Kan, GUO Shanshan. Hybrid Preheating Method for Lithium-ion Battery Used in Cold Environment [J]. Journal of Mechanical Engineering, 2019, 55(14): 53-59.
[4]	CHENG Ximing, TANG Yu, WANG Shouqun. Thermophysical Parameter Measurements for Lithium-Ion Batteries: A Review [J]. Journal of Mechanical Engineering, 2019, 55(14): 140-150.
[5]	LI Zhijie, CHEN Jiqing, LAN Fengchong, ZHENG Wenjie. Analysis and Evaluation on System Safety of Power Battery Pack under Mechanical Loading [J]. Journal of Mechanical Engineering, 2019, 55(12): 137-148.
[6]	LAN Fengchong, HUANG Peixin, CHEN Jiqing, LIU Jin. Study on the Method of Structural Dynamic Modeling and Analyzing of the EV's Battery Pack [J]. Journal of Mechanical Engineering, 2018, 54(8): 157-164.
[7]	Zong Ming Feng,Chao Zheng, . Fault Analysis of Magnetic Bearing Displacement Sensor Based on FPGA Adaptive Filter [J]. Journal of Electrical Engineering, 2018, 13(8): 1-6.
[8]	Zhang Yongchang,Jiao Jian,Liu Jie. Model-Free Predictive Current Control of the Voltage Source PWM Rectifier [J]. Journal of Electrical Engineering, 2018, 13(6): 1-6.
[9]	LIU Wanhui, LÜ Peng, YU Rui, FENG Kai. Design and Experimental Research of the Oil-free Turbocharger [J]. Journal of Mechanical Engineering, 2018, 54(19): 129-136.
[10]	HU Xiaosong, TANG Xiaolin. Review of Modeling Techniques for Lithium-ion Traction Batteries in Electric Vehicles [J]. Journal of Mechanical Engineering, 2017, 53(16): 20-31.
[11]	WANG Chaotai, LI Zicheng. Numerical Simulation Research of Sequential Fluid-solid Coupling Heat Transfer of Exhaust Turbine [J]. Journal of Mechanical Engineering, 2017, 53(15): 156-164.
[12]	Dongmin Miao, Yves Mollet, Johan Gyselinck, Jianxin Shen. Wide Speed Range Permanent Magnet Synchronous Generator Design for a DC Power System [J]. Chinese Journal of Electrical Engineering, 2017, 3(1): 33-41.
[13]	LIU Wei^{1, 2}, CAO Guozhong^{1, 2}, TAN Runhua^{1, 2}, YU Fei^{1, 2}. Research on Measures to Technical Realization of Multi Biological Effects [J]. Journal of Mechanical Engineering, 2016, 52(9): 129-141.
[14]	LIU Feifei, LAN Fengchong, CHEN Jiqing. Simulation and Experiment on Temperature Field of Lithium-ion Power Battery for Vehicle Based on Characteristic of Dynamic Heat Source [J]. Journal of Mechanical Engineering, 2016, 52(8): 141-151.
[15]	LI Shuqi, LIU Chang, HU Lifeng, XING Weidong, YANG Zhenhuan. Experimental Investigation on Centrifugal Compressor Performance Characteristics of Plateau Environment for Vehicle Turbocharger [J]. Journal of Mechanical Engineering, 2016, 52(20): 151-158.