Analysis on Different Topology Structures in Magnetic Coupling Resonant Wireless Power Transmission System

Abstract

Abstract:

The man input variables in the wireless power transmission (WPT) system are the working frequency and the transmission distance while the goal is to obtain high output power and transmission efficiency. For WPT systems based on magnetic coupling resonance (MCR), the relations between input variables and the target depend on the topology. Using the method of equivalent circuit to analyze, in detail, four topological structures applied in MCR-based WPT systems-serial-serial (SS) structure, serial-parallel (SP) structure, parallel-serial (PS) structure and parallel-parallel (PP) structure -this paper obtains the expressions to calculate the output power and the transmission efficiency, studies and compares relations of the power and efficiency versus frequency and distance. It is found from theoretical study and simulation analysis that all of these four topological structures reach the optimal matching around the resonant frequency, and subsequently the best transmission distance is obtained. It is also proved that the maximum transmission efficiency of the system is associated with the structure of the circuit at the receiving end and has no necessary link with the structure of the circuit at the transmitting end. This paper also presents an experiment using the serial-parallel structure which has demonstrated that the result from both theoretical analysis and simulation are correct.

Key words: Magnetic coupling resonance, topologies, output power, transmission efficiency

CLC Number:

TM72

Tian Zijian,Du Xinxin,Fan Jing,Cao Yangyang. Analysis on Different Topology Structures in Magnetic Coupling Resonant Wireless Power Transmission System[J]. Journal of Electrical Engineering, 2015, 10(6): 47-57.

Figures/Tables 21

Fig.1

Fig.2

Tab. 1

Tab. 2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

Fig.17

Tab.3

Fig.18

References 11

[1]	Kurs A, Karalis A, Moffatt R , et al. Wireless power transfer via strongly coupled magnetic resonances[J]. Science, 2007,317(5834):83-86. doi: 10.1126/science.1143254 pmid: 17556549
[2]	陈琛, 黄学良, 孙文慧 , 等. 金属障碍物对磁耦合谐振无线电能传输系统的影响[J]. 电工技术学报, 2014,29(4):22-26.
	Chen Shen, Huang Xueliang, Sun Wenhui , et al. Impact of metallic obstacles on MCR-based WPT systems[J]. Transactions of China Electrotechnical Society, 2014,29(4):22-26.
[3]	马爽 . 基于电磁场耦合模理论的空间无线能量传输技术研究[D]. 哈尔滨:哈尔滨工业大学, 2008.
[4]	Tan L L, Huang X L, Qiang H . Efficiency analysis and optimization on magnetic resonance coupled wireless transfer system[J]. Advanced Materials Research, 2011, 308-310:1345-1348. doi: 10.3390/s16081219 pmid: 27527169
[5]	Tan L L, Huang X L, Huang H , et al. Transfer efficiency optimal control of magnetic resonance coupled system of wireless power transfer based on frequency control[J]. Science China Technological Sciences, 2011,54(6):1428-1434. doi: 10.1007/s11431-011-4380-6
[6]	Sample A P, Meyer D A, Smith J R . Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer[J]. IEEE Transactions on Industrial Electronics, 2011,58(2):544-554. doi: 10.1109/TIE.2010.2046002
[7]	Imura T, Hori Y . Maximizing air gap and efficiency of magnetic resonant coupling for wireless power transfer using equivalent circuit and neumann formula[J]. IEEE Transactions on Industrial Electronics, 2011,58(10):4746-4752. doi: 10.1109/TIE.2011.2112317
[8]	黄学良, 吉青晶, 谭林林 , 等. 磁耦合谐振式无线电能传输系统串并式模型研究[J]. 电工技术学报, 2013,28(3):171-176.
	Huang Xueliang, Ji Qingjing, Tan Linlin , et al. Study on serial-parallel model in MCR-based WPT systems[J]. Transactions of China Electrotechnical Society, 2013,28(3):171-176.
[9]	侯佳, 陈乾宏, Wong Siu-Chung , 等. 非接触电能传输中输出增益对变压器参数变化的敏感度分析[C]. 2014无线电能传输技术与应用学术国际会议, 2014.
[10]	王宏健, 于乐, 陈江 . 无人水下航行器无线能量传输系统补偿网络研究[C]. 2014无线电能传输技术与应用学术国际会议, 2014.
[11]	周雯琪, 马皓, 何湘宁 . 感应耦合电能传输系统不同补偿拓扑的研究[J]. 电工技术学报, 2009,24(1):133-139.
	Zhou Wenqi, Ma Hao, He Xiangning . Study on topologies for different compensation in inducted coupling power transmission systems[J]. Transactions of China Electrotechnical Society, 2009,24(1):133-139.

频率f / kHz	输出功率P_out/ W	效率η
610	0.08	0.01
615	0.23	0.05
620	1.34	0.08
624	3.78	0.12
628	49.3	0.34
630	62.3	0.451
632	30.2	0.22
636	2.54	0.1
640	0.15	0.07
650	0.01	0.02
660	0	0

[1]	K. N. Mude, K. Aditya. Comprehensive Review and Analysis of Two-element Resonant Compensation Topologies for Wireless Inductive Power Transfer Systems [J]. Chinese Journal of Electrical Engineering, 2019, 5(2): 14-31.
[2]	LIU Yunfeng, ZHOU Yunshan, QU Daohai, WANG Jiande, FU Bing, ZHANG Feitie. Energy Consumption Analysis of Hybrid Continuously Variable Transmission Based on Electric Oil Pump [J]. Journal of Mechanical Engineering, 2018, 54(14): 125-131.
[3]	FU Bing, ZHOU Yunshan, HU Xiaolan, LI Hangyang, LIU Yunfeng, ZHANG Feitie. Friction Loss of Steel Rings in Metal V-belt CVT [J]. Journal of Mechanical Engineering, 2018, 54(14): 169-178.
[4]	HAN Ling, AN Ying, SOHEL Anwar, ZHAO Xilu. Clamping Force Control Strategy of Continuously Variable Transmission Based on Extremum Seeking Control of Sliding Mode [J]. Journal of Mechanical Engineering, 2017, 53(4): 105-113.
[5]	DONG Xinghui, ZHANG Xinmiao, ZHANG Guang, WANG Shuai. Analysis of Wind Turbine Output Power Characteristic Based on Cloud Model [J]. Journal of Mechanical Engineering, 2017, 53(22): 198-205.
[6]	Yunwei Li, Zhongyi Quan. Derivation of Multilevel Voltage Source Converter Topologies for Medium Voltage Drives [J]. Chinese Journal of Electrical Engineering, 2017, 3(2): 4-4.
[7]	Renyuan Tang, Wenming Tong, and Xueyan Han. Overview on Amorphous Alloy Electrical Machines and Their Key Technologies [J]. Chinese Journal of Electrical Engineering, 2016, 2(1): 1-12.
[8]	LIU Yajun, XU Xinxi, HUANG Tian. Workspace Topologies and Dimensional Synthesis for Biological Detection Manipulator [J]. Journal of Mechanical Engineering, 2015, 51(3): 51-57.
[9]	HU Qingchun, LI Jianying, DUAN Fuhai. Power Flow and Efficiency Analysis of Compound Planetary Gears Transmission with Bevel Gears [J]. Journal of Mechanical Engineering, 2015, 51(21): 42-48.
[10]	SUN Yuehai;LU Huawu;YANG Wenyan;LI Guoying. A Study on Manufacture and Experiment of Hardened TI Worm Gearing [J]. , 2011, 47(9): 182-186.
[11]	HUANG Zhengdong;KANG Weirui;PENG Yangping. Composite Configuration Space of Mechanical Assembly Model [J]. , 2011, 47(13): 113-122.
[12]	TANG Dewei;LI Qingkai;LIANG Tao;JIANG Shengyuan;DENG Zongquan. Mechanical Self-adaptive Drive Technology of Triaxial Differential Pipe-robot [J]. , 2008, 44(9): 128-133.
[13]	He Weidon;Li Lixing;Xu Yongxian;Chen Chenwen. ANALYSIS ON THE FORCES AND EFFICIENCY OF RV TRANSMISSION FOR HIGH PRECISION [J]. , 1996, 32(4): 104-110.
[14]	Liu Weiqiang;Zhang Qixian;Lei Tianjue. EXPERIMENTAL INVESTIGATION ON USING SOLID LUBRICATION IN A PLANETARY REDUCER WITH INTERNAL PLANET GEARS [J]. , 1995, 31(3): 39-43.