Design and Analysis of Permanent Magnet Synchronous Motor With Electric Screw for Arm

doi:10.11985/2018.08.006

Abstract

Abstract:

In this paper, the hydraulic drive system is replaced by the direct drive of the permanent magnet synchronous motor with the screw which connected to the rotor, because of the low transmission efficiency, oil spills and most likely a fire when working in high temperature environment.The parameters of an excavator boom cylinder are converted to the parameters as P_N= 22kW、n_N= 750r/min of the permanent magnet synchronous motor. The 6-pole 36-slot and 8-pole 48-slot motor are designed respectively, the no-load simulations is done in Maxwell at the same time. Air gap magnetic flux and cogging torque are optimized by the way of the use of the uneven air gap, the load simulations is achieved, and a permanent magnet synchronous motor that can be used to replace a hydraulic cylinder is also achieved.

Key words: Hydraulic drive, permanent magnet synchronous motor, screw drive, torque optimization

CLC Number:

TM351

Yang Junzi,Feng Guihong,Zhang Bingyi. Design and Analysis of Permanent Magnet Synchronous Motor With Electric Screw for Arm[J]. Journal of Electrical Engineering, 2018, 13(8): 32-36.

Figures/Tables 15

Fig.1

Tab.1

Tab.2

Tab.3

Tab.4

Tab.5

Tab.6

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Tab.7

References 10

[1]	官忠范 . 液压传动系统[M]. 北京: 机械工业出版社, 2009.
[2]	马先启 . 现代工程机械液压传动系统:构造、原理与故障排除[M]. 北京: 国防工业出版社, 2011.
[3]	陈文赢 . 液压传动系统在工程机械中的应用研究[J]. 中国机械, 2015(19):35-38.
	Chen Wenying . Research on application of hydraulic transmission system in engineering machinery[J]. Machine China, 2015(19):35-38.
[4]	冯长征 . 液压系统橡胶密封失效的原因分析及预防[J]. 建筑机械, 2000(1):33-35.
	Feng Changzheng . Cause analysis and prevention of failure of rubber seal in hydraulic system[J]. Construction Machinery, 2000(1):33-35.
[5]	周东华, 叶银忠 . 现代故障诊断与容错控制[M]. 北京:清华大学版社, 2000.
[6]	Zogg D, Shafai E, Geering H P . Fault diagnosis for heat pump swith parameter identification and clustering[J]. Control Engineering Practice, 2006,14(12):1435-1444. doi: 10.1016/j.conengprac.2005.11.002
[7]	濮良贵, 纪名刚 . 机械设计[M]. 北京: 高等教育出版社, 2006.
[8]	陈春华, 章军, 田志伟 , 等. 电动推杆驱动串联双铰链柔性机械手的状态分析[J]. 机械制造, 2015,53(2):31-33.
	Chen Chunhua, Zhang Jun, Tian Zhiwei , et al. State analysis of flexible manipulator driven by electric push rod in series[J]. Machinery, 2015,53(2):31-33.
[9]	李军超 . 数控电动螺旋压力机控制关键技术研究[D]. 武汉:华中科技大学, 2008.
[10]	Chih C L, Chung C Y, Hung C C. A new motor design for hermetic DC compressor[C]. Internationa Conference on Power Electronics and Drives Systems, Kuala Lumpur, 2005: 581-583.

名称	参数
活塞杆直径/mm	65
缸桶直径/mm	115
最大工作行程/mm	900
工作油路压力/MPa	26
活塞工作速度/(m/s)	0.25
动臂提升时间/s	3.3
动臂工作时间/s	6.5

应用场合	寿命/h
普通机械	5 000~10 000
普通机床	10 000~20 000
数控机床	20 000

极槽配合	6极36槽	8极48槽
定子外径/mm	310	310
定子内径/mm	195	205
铁心长度/mm	215	230
气隙长度/mm	0.8	0.8
永磁体长度/mm	84	64
永磁体宽度/mm	7	6
空载反电动势/V	203.3	203.5
热负荷/[A²/(cm·mm²)]	1 003.13	934.68
额定转矩/N·m	278.35	280.51

电流角/(°)	6极36槽电机转矩/N	8极48槽电机转矩/N
20	287.25	286.54
22.5	287.59	286.01
25	287.36	284.88
27.5	286.26	283.10
30	284.51	280.68

[1]	YU Tong,LIU Jun,SUN Weifan. Weak Magnetic Control of Permanent Magnet Synchronous Motor Based on Fuzzy Theory [J]. Journal of Electrical Engineering, 2019, 14(1): 1-8.
[2]	Feng guihong,Huang he,Liu xiangyan. Research and Improvement of Permanent Magnet Synchronous Motor Direct Torque Control [J]. Journal of Electrical Engineering, 2018, 13(9): 1-7.
[3]	Hu Bi,Cao Wenyao,Hu Tuxiong,Wang Wei. Analysis and Design of Permanent Magnet Synchronous Motor for Injection Molding Machine [J]. Journal of Electrical Engineering, 2018, 13(9): 26-31.
[4]	Jikai Si, Suzhen Zhao, Lufeng Zhang, Ruiwu Cao, Wenping Cao. The Characteristics Analysis and Cogging Torque Optimization of a Surface-Interior Permanent Magnet Synchronous Motor [J]. Chinese Journal of Electrical Engineering, 2018, 4(4): 41-47.
[5]	YU Bin, BA Kaixian, WANG Dongkun, LIU Yaliang, LI Wenfeng, KONG Xiangdong. Feedforward Compensation Control for Hydraulic Drive Unit Position Control System [J]. Journal of Mechanical Engineering, 2018, 54(20): 159-169.
[6]	Yaojing Feng, Fang Li, Shoudao Huang, Ning Yang. Variable-Flux Outer-Rotor Permanent Magnet Synchronous Motor for In-Wheel Direct-Drive Applications [J]. Chinese Journal of Electrical Engineering, 2018, 4(1): 28-35.
[7]	Jikai Si, Suzhen Zhao, Haichao Feng, Ruiwu Cao, Yihua Hu. Multi-Objective Optimization of Surface-Mounted and Interior Permanent Magnet Synchronous Motor Based on Taguchi Method and Response Surface Method [J]. Chinese Journal of Electrical Engineering, 2018, 4(1): 67-73.
[8]	Guoqiang Zhang, Gaolin Wang, Dianguo Xu. Saliency-Based Position Sensorless Control Methods for PMSM Drives - a Review [J]. Chinese Journal of Electrical Engineering, 2017, 3(2): 8-8.
[9]	PENG Guobin, JIANG Yan, LIU Ping, HUANG Shoudao, HE Renhao. Efficiency Optimization Control of IPMSM Driving System for Electric Vehicles Using Quasi-Z Source Inverter [J]. Journal of Mechanical Engineering, 2017, 53(16): 70-78.
[10]	BA Kaixian, KONG Xiangdong, ZHU Qixin, LI Chunhe, ZHAO Hualong, YU Bin. Position/Force-based Impedance Control and Their Experimental Research on Hydraulic Drive Unit [J]. Journal of Mechanical Engineering, 2017, 53(12): 172-185.
[11]	Lan Zhiyong,Wei Xuehuan,Li Huru,Liao Keliang,Chen Linhong. Thermal Analysis of PMSM Based on Lumped Parameter Thermal Network Method [J]. Journal of Electrical Engineering, 2017, 12(1): 17-21.
[12]	LI Te^{1, 2}, MA Shugen^{1, 3}, LI Bin¹, WANG Minghui¹, WANG Yuechao¹. Design and Motion Mechanism of a Screw Drive In-pipe Robot with Adaptability to In-pipe Environment [J]. Journal of Mechanical Engineering, 2016, 52(9): 9-17.
[13]	Zhang Haifeng,Dong Zhi,Li Zhengxi. Optimization Design and Performance Analysis of Line Start Permanent Magnet Synchronous Motor [J]. Journal of Electrical Engineering, 2016, 11(11): 47-.
[14]	LIU Yiqun, DENG Zongquan, LIU Zhen, DING Liang, GAO Haibo, LI Yuchao. Low-impact Motion Planning Method of Hydraulically Actuated Hexapod Robot [J]. Journal of Mechanical Engineering, 2015, 51(3): 10-17.
[15]	Yang Mei, Kai Sun, Yuchao Shi. A 2-D Fuzzy Logic Based MRAS Scheme for Sensorless Control of Interior Permanent Magnet Synchronous Motor Drives with Cyclic Fluctuating Loads [J]. Chinese Journal of Electrical Engineering, 2015, 11(1): 85-91.