Journal of Electrical Engineering ›› 2019, Vol. 14 ›› Issue (4): 93-97.doi: 10.11985/2019.04.014

Previous Articles     Next Articles

Research on the Method of VFTO Suppression in 1 000 kV Gas Insulated Switchgear

Youhua GAO,Yiping ZHAO,Shuxin LIU   

  1. School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870 China
  • Received:2019-09-09 Online:2019-12-25 Published:2020-03-18

Abstract:

The ultra-fast transient over-voltage(VFTO) has the characteristics of high amplitude, steep wavefront, long frequency band and long duration. The rated voltage determines the damage degree of VFTO to the equipment, and it also seriously threatens the safety of gas insulated switchgear(GIS) and neighboring power equipment. Finding effective inhibitory measures is extremely important. There are several measures that have inhibitory effects, but there are corresponding defects. A design method for high frequency overvoltage suppression wires is presented, namely damping bus bars. Under the power frequency, the insulation performance and flow capacity of the busbar do not affect the performance, but when the frequency is high, the traveling wave current forms a high voltage at the inductor end. The traveling wave energy is absorbed by the damping resistor at both ends under the action of high voltage, which inhibits VFTO.

Key words: Very fast transient overvoltage, suppression conductor, GIS, travelling wave

CLC Number: