[1] |
汤桂华, 郑冲 . 《硫酸工业》[M]. 北京: 化学工业出版社, 1966.
|
[2] |
郑冲, 叶树滋 . 设计的理想分段条件和逐段最大温差调节法[J]. 硫酸工业, 1979(3):8.
|
|
Zheng Chong, Ye Shuzi . Design ideal conditions and piecewise segmentation maximum temperature adjustment method[J]. Sulfuric Acid Industry, 1979(3):8.
|
[3] |
Chen Chunhua, Yu Feng, Cui Bin. Modeling of SO2 conversion in the process of acid-making [C]. Chinese Control and Decision Conference, 2011.
|
[4] |
高桥忠武. SO2平衡转化率算图[J]. 硫酸工业, 1964(6):56-57.
|
|
Takahashi Chungmu . SO2 equilibrium conversion rate nomogram[J]. Sulfuric Acid Industry, 1964(6):56-57.
|
[5] |
陆重庆 . 二氧化硫氧化反应平衡常数的计算[J]. 硫酸工业, 1981(1):12.
pmid: 563866
|
|
Lu Chongqing . SO2 oxidation reaction equilibrium constants[J]. Sulfuric Acid Industry, 1981(1):12.
pmid: 563866
|
[6] |
向德辉 . 对二氧化硫氧化工业反应器工艺设计计算的探讨关于S型钒催化剂的动力学方程和催化剂[J]. 硫酸工业, 1979(1):1-13.
|
|
Xiang Dehui . Discussion on the oxidation of sulfur dioxide industry reactor technology design and calculation of dynamic equations on S-type vanadium catalyst catalyst[J]. Sulfuric Acid Industry, 1979(1):1-13.
|
[7] |
陈五平 . 无机化工工艺学(二)[M]. 1版.北京: 化学工业出版社, 1981.
|
[8] |
角仕云, 郎小川, 将丽红 . 二氧化硫催化氧化反应的绝热温升计算[J]. 四川化工与腐蚀控制, 2001,4(1):6-9.
|
|
Jiao Shiyun, Lang Xiaochuan, Jiang Lihong . Adiabatic temperature catalytic oxidation of sulfur dioxide is calculated[J]. Sichuan Chemical and Corrosion Control, 2001,4(1):6-9.
|
[9] |
陈甘棠 . 化学反应工程[M]. 北京: 化学工业出版社, 1990.
|
[10] |
Zhang Jun, Henry Shu, Hung Chung, Wai Lun Lo. Clustering based adaptive crossover and mutation probabilities for genetic algorithms[J]. IEEE Transactions on Evolutionary Compution, 2007,3:326-334.
|
[11] |
Adenike A , Adewuya. New methods in genetic search with real valued chromosomes[D]. America: Mississippi State University, 1993.
|
[12] |
Wang K, Lee Y. A real coded genetic algorithm involving a hybrid crossover method for power plant control system design [C]. IEEE Proceeding of Conference on Evolutionary Computation. Pennsylvaniam, 2002: 1069-1074.
|
[13] |
Anthony A Lizzio , Joseph A DeBarr. Mechanism of SO2 removal by carbon. Energy Fuels, 1997,11(2):284-291.
doi: 10.1021/ef960197+
|