Journal of Electrical Engineering ›› 2022, Vol. 17 ›› Issue (1): 234-243.doi: 10.11985/2022.01.029

Previous Articles     Next Articles

扫码分享

Influence of Voltage Stabilizer on the DC Breakdown Strength of PP/ Elastomer Blends

MENG Fei1(), SHAO Manzhi1, NIU Yue2, HU Wei3, LI Chunyang1(), ZHAO Hong1   

  1. 1. Key Laboratory of Engineering Dielectrics and Its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080
    2. Chifeng Power Supply Company, State Grid Inner Mongolia Eastern Electric Power Co., Ltd., Chifeng 024000
    3. Nanchang Power Supply Company, State Grid Jiangxi Electric Power Co., Ltd., Nanchang 330069
  • Received:2021-07-21 Revised:2021-11-01 Online:2022-03-25 Published:2022-05-06
  • Contact: LI Chunyang E-mail:y1017mf@163.com;lichunyang_hust@163.com

Abstract:

Elastomer polymer can be used to improve the toughness of polypropylene (PP) insulation material, but it may weaken the electrical properties of PP. Voltage stabilizer has been used to improve the electrical properties of XLPE, but it is not clear whether it can play a role in PP based insulation materials. The effects of two elastomer polymers (POE and SEBS) on the mechanical and DC breakdown properties of PP are studied. The influence of voltage stabilizer on DC breakdown strength is investigated with the optimal components, which are selected by the mechanical properties. The results show that POE and SEBS can toughen PP, but the DC breakdown strength of the composites decreases with the increase of POE and SEBS. All the three voltage stabilizers can improve the electrical properties of pure PP, especially the AOHBP realized an increment of 34.6% when 0.4 phr is doped. However, none of the three voltage stabilizers can improve the DC breakdown strength of elastomers or PP/elastomer blends, and the effect of voltage stabilizers is significantly affected by the polymer matrix.

Key words: Polypropylene insulation, thermoplastic elastomer, voltage stabilizer, blending modification, DC breakdown strength

CLC Number: