Deflection Calculation of Curved Eccentricity in Large Induction Motor

doi:10.11985/2019.02.009

Abstract

Abstract:

For large induction motor, eccentricity problem is one of classical faults. At the same time, eccentricity leads to the degradation of motor’s performance. It’s meaningful to study eccentricity problem of large motor. Curved eccentricity is mostly appeared due to elasticity modulus of the material. However, there are sorts of factors causing curved eccentricity, mainly including gravity of rotor part, centrifugal force and the unbalanced magnetic pull(UMP). The calculation of deflection is based on approximately differential equation of the deflection curve in mechanics of materials. In addition, dynamic UMP calculation is established and UMP will be of no big deal to eccentricity deflection in induction motor according to the calculation below. The formation of curved eccentricity is explained and three kinds of forces carried on rotor quantitatively are compared. Furthermore, the final curve equation is figured out. Among the calculation, finite element analysis is used to calculate UMP force accurately.

Key words: Induction motor, curved eccentricity, elasticity modulus, dynamic UMP, deflection calculation

CLC Number:

TM315

CHEN Lei. Deflection Calculation of Curved Eccentricity in Large Induction Motor[J]. Journal of Electrical Engineering, 2019, 14(2): 47-54.

Figures/Tables 13

References 21

[1]	Ebrahimi B M, Faiz J, Roshtkhari M J . Static-,dynamic-,and mixed-eccentricity fault diagnoses in permanent magnet synchronous motors[J]. IEEE Transactions on Industrial Electronics, 2009,56(11):4727-4739.
[2]	Faiz J, Ebrahimi B M, Akin B , et al. Finite-element transient analysis of induction motors under mixed eccentricity fault[J]. IEEE Transactions on Magnetics, 2008,44(1):66-74.
[3]	Nandi S, Ahmed S, Toliyat H A . Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages[J]. IEEE Transactions on Energy Conversion, 2001,16(3):253-260.
[4]	Nandi S, Bharadwaj R M, Toliyat H A . Performance analysis of a three-phase induction motor under mixed eccentricity condition[J]. IEEE Transactions on Energy Conversion, 2002,17(3):392-399.
[5]	Hyun D, Lee S, Hong J , et al. Detection of airgap eccentricity for induction motors using the single-phase rotation test[J]. IEEE Transactions on Energy Conversion, 2012,27(3):689-696. doi: 10.1109/TEC.2012.2198218
[6]	Dorrell D G, Hsieh M, Guo Y . Unbalanced magnet pull in large brushless rare-earth permanent magnet motors with rotor eccentricity[J]. IEEE Transactions on Magnetics, 2009,45(10):4586-4589.
[7]	Dorrell D G . Calculation of unbalanced magnetic pull in small cage induction motors with skewed rotors and dynamic rotor eccentricity[J]. IEEE Transactions on Magnetics, 1996,11(3):483-488.
[8]	Dorrell D G . Sources and characteristics of unbalanced magnetic pull in 3-phase cage induction motors with axial-varying rotor eccentricity [C]. IEEE Energy Conversion Congress and Exposition, 2009: 240-247.
[9]	Belmans R, Vandenput A, Geysen W . Calculation of the flux density and the unbalanced magnetic pull in two pole induction machine[J]. Archiv Fur Elektrotechnik, 1987,70(3):151-161.
[10]	Richard P, Urban L, Mats L . Saturation effects on unbalanced magnetic pull in a hydroelectric generator with an eccentric rotor[J]. IEEE Transactions on Magnetics, 2007,43(10):3884-3890.
[11]	Bradford M . Unbalanced magnetic pull in a 6-pole induction motor[J]. Proceedings of the Institution of Electrical Engineers, 1968,115(11):1619-1627.
[12]	Binns K J, Dye M . Identification of principal factors causing unbalanced magnetic pull in cage induction motors[J]. Proceedings of the Institution of Electrical Engineers, 1973,120(3):349-354.
[13]	Arkkio C A, Antila M, Pokki K , et al. Electromagnetic force on a whirling cage rotor[J]. IEEE Proceedings- Electric Power Applications, 2000,147(5):353-360.
[14]	Di C, Bao X, Wang H , et al. Modeling and analysis of unbalanced magnetic pull in cage induction motors with curved dynamic eccentricity[J]. IEEE Transactions on Magnetics, 2015,51(8):1-7.
[15]	左曙光, 林福, 孙庆 , 等. 极槽配合和绕组层数对永磁同步电机振动的影响分析[J]. 振动与冲击, 2014,33(13):130-134.
	Zuo Shuguang, Lin Fu, Sun Qin , et al. Vibration of permanent magnet synchronous motor with different slot-pole combinations and winding layers[J]. Journal of Vibration and Shock, 2014,33(13):130-134.
[16]	代颖, 崔淑梅, 张千帆 . 车用异步电机的电磁振动/噪声分析(英文)[J]. 中国电机工程学报, 2012,32(33):89-97,180.
	Dai Ying, Cui Shumei, Zhang Qianfan . Analysis on electromagnetic vibration/noise of induction motors for EV drives[J]. Proceedings of the CSEE, 2012,32(33):89-97,180.
[17]	马琮淦, 左曙光, 孙庆 , 等. 考虑时间谐波电流的永磁同步电机电磁噪声阶次特征分析[J]. 振动与冲击, 2014,33(15):108-113,125.
	Ma Conggan, Zuo Shuguang, Sun Qing , et al. Order feature analysis of electromagnetic noise in a permanent magnet synchronous motor considering current harmonics[J]. Journal of Vibration and Shock, 2014,33(15):108-113,125.
[18]	诸自强, 刘旭, 潘再平 . 新型可变磁通磁阻电机振动和噪声研究与开关磁阻电机的比较(英文)[J]. 电工技术学报, 2013,28(11):9-18.
	Zhu Ziqiang, Liu Xu, Pan Zaiping . Investigation of vibration and noise in novel variable flux reluctance machine with reference to switched reluctance machine[J]. Transactions of China Electrotechnical Society, 2013,28(11):9-18.
[19]	He G, Huang Z, Qin R , et al. Numerical prediction of electromagnetic vibration and noise of permanent magnet direct current commutator motors with rotor eccentricities and glue effects[J]. IEEE Transactions on Magnetics, 2012,48(5):1924-1931. doi: 10.1109/TMAG.2011.2178100
[20]	Jia S, Qu R, Li J, et al. Analysis of FSCW SPM servo motor with static,dynamic and mixed eccentricity in aspects of radial force and vibration [C]. IEEE Energy Conversion Congress and Exposition (ECCE),Pittsburgh,PA, 2014: 1745-1753.
[21]	Kim D, Kim H, Hong J , et al. Estimation of acoustic noise and vibration in an induction machine considering rotor eccentricity[J]. IEEE Transactions on Magnetics, 2014,50(2):857-860.

参数	数值
D_I/mm	220
D_O/mm	346
L₁/mm	1 400
L₂/mm	300
DW600_50/(kg/m³)	7 650
45#钢/(kg/m³)	7 850
E_sss/GPa	195
E_shaft/GPa	80.65
I_shaft/(kg·m²)	74.6
I_sss/(kg·m²)	75