Design and Research of a Device for Simulating Circuit Breaker Load

doi:10.11985/2019.02.007

Abstract

Abstract:

To improve the low routine test efficiency of a hydraulic operating mechanism which is the core component of a certain type 550 kV circuit breaker (CB), a simulated load device with convenient installation and equivalent characteristics of this specific type circuit breaker is designed. Firstly, the actual load characteristics of the circuit breaker are analyzed and found, including the maximum reaction force and its corresponding position in the whole CB travel. Secondly, the hydraulic buffer is designed according to the obtained force situation. Finally, the performance of the hydraulic buffer is tested on the hydraulic operating mechanism. The final test results show that the characteristics of the simulated load device are equivalent to the circuit breakers, and which has he advantages of high life, easy installation and maintenance free. After its application, the simulated load device has greatly improved the routine test efficiency of the hydraulic operating mechanism.

Key words: Simulated load device, operating mechanism, mechanical characteristics

CLC Number:

TM561

WANG Mingjie. Design and Research of a Device for Simulating Circuit Breaker Load[J]. Journal of Electrical Engineering, 2019, 14(2): 38-42.

Figures/Tables 12

References 7

[1]	林莘 . 现代高压电器技术[M]. 北京: 机械工业出版社, 2002.
[2]	徐国政, 张节荣, 钱家骊 , 等. 高压断路器原理和应用[M]. 北京: 清华大学出版社, 2000.
[3]	苗明, 孙爽, 苗文博 . 多孔式液压缓冲器仿真与优化设计[J]. 起重运输机械, 2007,10(10):13-16.
	Miao Ming, Sun Shuang, Miao Wenbo . Simulation and optimization design of multi-orifice hydraulic buffer[J]. Hoisting and Conveying Machinery, 2007,10(10):13-16.
[4]	魏忠勇, 赵鸿飞, 刘伟 , 等. 高压断路器液压操动机构油缸缓冲过程仿真与试验[J]. 农业机械学报, 2010,41(6):216-221.
	Wei Zhongyong, Zhao Hongfei, Liu Wei , et al. Buffering process simulation and experiment of hydraulic operating mechanism in high voltage circuit breaker[J]. Transactions of the Chinese Society of Agricultural Machinery, 2010,41(6):216-221.
[5]	章一明 . 液压缓冲器设计参数研究[J]. 华东冶金学院学报, 1994,3(3):54-58.
	Zhang Yiming . Research on hydraulic buffer design parameters[J]. Journal of East China Institute of Metallurgy, 1994,3(3):54-58.
[6]	余明星, 赵伟涛 . 弹簧操动机构用缓冲器流场仿真和强度分析[J]. 高压电器, 2016,7(52):130-135.
	Yu Mingxing, Zhao Weitao . Flow field simulation and strength analysis of buffers in spring operating mechanisms[J]. High Voltage Apparatus, 2016,7(52):130-135.
[7]	王明杰, 晁君 . 高压断路器用操动机构的机械特性试验方法[J]. 电气制造, 2013(10):23-25.
	Wang Mingjie, Chao Jun . Test method for mechanical characteristics of operating mechanism in high voltage circuit breakers[J]. Electrical Manufacturing, 2013(10):23-25.

[1]	ZHAO Weitao,LIU Chao,DANG Dewang,GU Lei,ZHANG Qiang. Dynamic Simulation Research on SF₆ High Voltage Circuit Breaker [J]. Journal of Electrical Engineering, 2019, 14(2): 30-37.
[2]	Wei Kai,Ma Feng Liu, ,Chen Xu. An Electric Permanent Magnet Motor Operating Mechanism Improvement [J]. Journal of Electrical Engineering, 2018, 13(9): 44-49.
[3]	LI Cheng, XIAO Jun, GUO Tingting, FAN Shangchun, JIN Wei. Large Deflection Mechanical Characteristics of Graphene Films [J]. Journal of Mechanical Engineering, 2015, 51(6): 87-92.
[4]	GUO Kai;YUAN Shihua;ZHANG Yuyan;WANG Xiaoli. Study on the Calculation Method of Ball Bearing Mechanical Characteristics Considering Elastohydrodynamic Lubrication with [J]. , 2013, 49(15): 62-67.
[5]	LIU Wei;XU Bing;YANG Huayong;WU Zhongyu. Characteristic Analysis of High Voltage Circuit Breaker with Hydraulic Operating Mechanism [J]. , 2010, 46(10): 148-155.
[6]	HU Xixing;GUO Jifeng;FU Ping;SHEN Runjie. Mechanical Characteristics Calculation of 2-DOF Spherical Traveling-wave Type Ultrasonic Motor [J]. , 2009, 45(3): 229-233.
[7]	WANG Guangqing;LU Guoli;GUO Jifeng. Analytical Model of Traveling-wave Type Ultrasonic Motor Based on the Energy Equivalent Method [J]. , 2008, 44(2): 74-81.
[8]	Zhang Gang;Yu Lie;Xie Youbai. MECHANICAL CHARACTERISTICS OF THRUST MAGNETIC BEARING AND ITS EFFECT ON RADIAL MAGNETIC BEARINGS IN THE SYSTEM [J]. , 2000, 36(12): 5-8.