Characteristics Study of Multi-Parameter Change of MSMA Sensor

doi:10.11985/2017.08.003

Abstract

Abstract:

Magnetic controlled shape memory alloy (MSMA) produces deformation under the action of magnetic field, the magnetic flux density of the material itself can change when the external exciting force is applied, and then manifest as an electric signal change. Based on the characteristics, a MSMA sensor prototype is designed and produced in this paper, and the experimental system is built. Induced voltage model is established based on the change of Martensitic variants volume fraction. The output properties of MSMA sensor are studied under the multi-parameter change of bias magnetic field, pre-pressure and exciting force (frequency and amplitude). By compared of experimental values and calculated values of sensor, the universality and validity is proved on sensor model at multi-parameter change, the research work gives a foundation in theory and technology both for the application of MSMA sensor in complex condition.

Key words: MSMA, sensor, multi-parameter, model, induced voltage

CLC Number:

TM315

Lu Jun,Yu Qingyang,Su Chaofeng. Characteristics Study of Multi-Parameter Change of MSMA Sensor[J]. Journal of Electrical Engineering, 2017, 12(8): 16-20.

Figures/Tables 10

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

References 11

[1]	Sozinov A, Likhachev A A, Ullakko K . Crystal structures and magnetic anisotropy properties of Ni₂-MnGa martensitic phases with giant magnetic-field-induced strain[J]. IEEE Trans. Magn., 2002,38(9):281-284.
[2]	曾建斌, 白保东, 曾庚鑫 , 等. 考虑压力变化的超磁致伸缩超声换能器动态模型[J]. 电工技术学报, 2012,27(10):215-219.
	Zeng Jianbin, Bai Baodong, Zeng Gengxin , et al. Dynamic models of giant magnetostrictive ultrasonic transducer taking account into variable pressure[J]. Transactions of China Electrotechnical Society, 2012,27(10):215-219.
[3]	Ullakko K , et al. Magnetically controlled shape memory alloys: a new class of actuator materials[J]. Journal of Materials Engineering and Performance, 1996,15(3):405-409.
[4]	Marioni, O'Handley, et al. Pulsed magnetic field induced actuation of Ni-Mn-Ga single crystals[J]. Applied Physics Letters, 2003,83(19):3966-3968.
[5]	王凤翔, 张庆新, 吴新杰 , 等. 磁控形状记忆合金蠕动型直线电机研究[J]. 中国电机工程学报, 2004,24(7):140-144.
	Wang Fengxiang, Zhang Qingxin, Wu Xinjie , et al. Research of magnetic control shape memory alloy creep type linear motor[J]. Proceedings of the CSEE, 2004,24(7):140-144.
[6]	Suorsa I, Tellinen J, Ullakko K , et al. Voltage generation induced by mechanical straining in magnetic shape memory materials[J]. Journal of Applied Physics, 2004,95(12):8054-8058.
[7]	Karaman I, Basaran B , et al. Energy harvesting using martensite variant reorientation mechanism in NiMn- Ga shape memory alloy[J]. Applied. Physics. Letter., 2007,90(17):2505-2507.
[8]	鲁军, 李敏, 王凤翔 . 基于MSMA逆特性的振动传感器理论及实验研究[J]. 电工技术学报, 2014,21(5):233-238.
	Lu Jun, Li Min, Wang Fengxiang . Theoretical and experimental study on vibration sensor based on MSMA inverse characteristics[J]. Transactions of China Electrotechnical Society, 2014,29(5):233-238.
[9]	Kiefer B, Lagoudas D C . Magnetic field-induced martensitic variant reorientation in magnetic shape memory alloys[J]. Philosophy Magazine, 2005,85(35):4289-4329.
[10]	Haldar K, Kiefer B , et al. Finite element analysis of the demagnetization effect and stress inhomo-geneities in magnetic shape memory alloy samples[J]. Philosophy Magazine, 2011,91(32):4126-4157.
[11]	Sarawate N N, Dapino M J . Magnetic-field- induced stress and magnetization in mechanically blocked Ni-Mn-Ga[J]. Journal of Applied Physics, 2008,103(8):839-842.

[1]	LIU Xiaoyang, LIU Enfu, JIN Jiangyan. Asynchronous Parallel Assembly Sequence Planning Based on Ant Colony Algorithm [J]. Journal of Mechanical Engineering, 2019, 55(9): 107-119.
[2]	WANG Liping, ZHANG Zhaokun, SHAO Zhufeng, WANG Min. Research on the Information Model of Digital Machining Workshop for Machine Tools and Its Applications [J]. Journal of Mechanical Engineering, 2019, 55(9): 154-165.
[3]	YUN Ruide, DING Bei. New Fractal Contact Model Considered Multi-scale Levels [J]. Journal of Mechanical Engineering, 2019, 55(9): 80-89.
[4]	ZHAN Qiang, LI Wei. Research Progress and Development Trend of Spherical Mobile Robots [J]. Journal of Mechanical Engineering, 2019, 55(9): 1-17.
[5]	XIE Yanmin, ZHANG Fei, PAN Beibei, FENG Meiqiang, YUE Yaopeng. Optimization of Drawbeads Based on Parallel Infilling Strategy and Kriging Models [J]. Journal of Mechanical Engineering, 2019, 55(8): 73-79.
[6]	WANG Yi, CAI Yingfeng, CHEN Long, WANG Hai, HE Youguo, LI Jian. Design of Intelligent and Connected Vehicle Path Tracking Controller Based on Model Predictive Control [J]. Journal of Mechanical Engineering, 2019, 55(8): 136-144,153.
[7]	ZHOU Bo, WANG Zhiyong, XUE Shifeng. Mechanical Model for Super-elastic Helical Spring of Shape Memory Alloy [J]. Journal of Mechanical Engineering, 2019, 55(8): 56-64.
[8]	NIU Liubin, LIU Jinzhao. Study on Sensitive Wavelength Characteristics of Track Short Wave Irregularity Based on High Frequency Wheel/rail Contact Model [J]. Journal of Mechanical Engineering, 2019, 55(8): 173-182.
[9]	CUI Lingli, WANG Xin, WANG Huaqing, XU Yonggang, ZHANG Jianyu. Feature Extraction of Bearing Fault Based on Improved Switching Kalman Filter [J]. Journal of Mechanical Engineering, 2019, 55(7): 44-51.
[10]	CAI Wanqiang, WANG Shilong, ZHANG Qi, YANG Wenhan, YI Lili. Research on Time-varying and Nonlinear Tension Control Model in the Winding Process of SWHS and Simulation [J]. Journal of Mechanical Engineering, 2019, 55(7): 147-154.
[11]	HE Yuhui, XU Yanbin, TANG Jinyuan, ZHAO Bo. Study on Heat Source Distribution Model of High-order Function in Grinding Arc Area [J]. Journal of Mechanical Engineering, 2019, 55(7): 199-206.
[12]	CHEN Bing, LIU Wei, LUO Ming, ZHANG Xiaoteng. Reverse Identification of John-Cook Constitutive Parameters of Superalloy Based on Orthogonal Cutting [J]. Journal of Mechanical Engineering, 2019, 55(7): 217-224.
[13]	XUE Qiwen, DU Xiuyun. Fatigue Design of Welded Structure Based on the Non-linear Cumulative Damage Theory [J]. Journal of Mechanical Engineering, 2019, 55(6): 32-38.
[14]	LI Shujuan, XIN Bin, YANG Yuxiang, LU Xiong, LI Yan, JIANG Bailing, JIA Zhen, LI Yuxi. Investigation of Plasma Volt-ampere Characteristics and Gap Modeling of EDM [J]. Journal of Mechanical Engineering, 2019, 55(5): 232-240.
[15]	ZHU Libin, CAO Huajun, HUANG Haihong, LIU Zhifeng. Air Cooling System Thermodynamic Analysis and Thermal Balance Control of Dry Cutting Machine Tool [J]. Journal of Mechanical Engineering, 2019, 55(5): 204-211.