Research on Automatic Configuration of SCADA Based on 104 Protocol

doi:10.11985/2016.06.006

Abstract

Abstract:

In order to reduce debugging complexity between the master station and the terminal in the distribution automation project, the automatic configuration of SCADA based on 104 protocol is deeply researched on in the paper. The 104 protocol is briefly introduced and the characteristics of the 104 protocol are analyzed; the process of point configuration, debugging and data acquisition between the master station and the terminal of distribution automation are deeply analyzed. Based on the object-oriented method, a SCADA automatic configuration solution based on 104 protocol is put forward, and the realization of the key technologies is described in the paper.

Key words: Object-oriented, 104 protocol, automatic configuration, DMS

CLC Number:

TM76

Peng Daiwen,Feng Jianxia,Xue Chao. Research on Automatic Configuration of SCADA Based on 104 Protocol[J]. Journal of Electrical Engineering, 2016, 11(6): 33-39.

Figures/Tables 9

Fig.1

Fig.2

Tab.1

Fig.3

Fig.4

Fig.5

Fig.6

Tab.2

Tab.3

References 9

[1]	沈兵兵, 吴琳, 王鹏 . 配电自动化试点工程技术特点及应用成效分析[J]. 电力系统自动化, 2012,36(18):27-32.
	Shen Bingbing, Wu Lin, Wang Peng . Technological characteristics and application effects analysis of distribution automation pilot projects[J]. Automation of Electric Power Systems, 2012,36(18):27-32.
[2]	徐丙垠, 李天友 . 配电自动化若干问题的探讨[J]. 电力系统自动化, 2010,34(9):81-86.
	Xu Bingyin, Li Tianyou . Investigations to some distribution automation issues[J]. Automation of Electric Power Systems, 2010,34(9):81-86.
[3]	周强强, 徐宁 . 电力远动CDT规约向IEC61850转换的研究和实现[J]. 广东输电与变电技术, 2010,12(1):53-55.
	Zhou Qiangqiang, Xu Ning . Research and implementation of the conversion of CDT protocol towards IEC 61850[J]. Guangdong Power Transmission Technology, 2010,12(1):53-55.
[4]	DL/T 634.5104—2002.远动设备及系统第5-104部分:传输规约采用标准传输协议子集的IEC 60870-5-101访问网络[S]. 北京: 中国标准出版社, 2002.
[5]	石文江, 冯松起, 夏燕东 , 等. 新型智能配电自动化终端自描述功能的实现[J]. 电力系统自动化, 2012,36(4):105-109.
	Shi Wenjiang, Feng Songqi, Xia Yandong , et al. New intelligent power distribution automation terminal self-describing[J]. Automation of Electric Power Systems, 2012,36(4):105-109.
[6]	国家电力监管委员会. 电监安全[2006]34号.电力二次系统安全防护总体方案[S]. 2006.
[7]	洪宪平 . 走向网络化的远动系统[J]. 电力系统自动化, 2001,25(6):1-3.
	Hong Xianping . Telecontrol system tending towards network[J]. Automation of Electric Power Systems, 2001,25(6):1-3.
[8]	李强, 朱永利 , 等. 104规约向IEC61850信息模型转换的研究与实现[J]. 华北电力大学学报, 2008,35(2):98-102.
	Li Qiang, Zhu Yongli , et al. Research and implementation of conversion of 104 protocol toward IEC 61850 information model[J]. Journal of North China Electric Power University, 2008,35(2):98-102.
[9]	吴在军, 胡敏强 . 基于IEC61850标准的变电站自动化系统研究[J]. 电网技术, 2003,27(10):61-65.
	Wu Zhaijun, Hu Mingqiang . Research on a substation automation system based on iec 61850[J]. Power System Technology, 2003,27(10):61-65.

步骤	主站	终端
1	–	安装、接线
2	建模：建立电网拓扑模型,配置设备的采集量	配点：为每个终端设备的采集设备、采集的量分配点号,并提供给主站人员
3	配点：建立每个终端通道,并为每个设备的采集量配置终端对应的点号	–
4	对点调试	对点调试
5	根据点号定义,将实时数据转换为电网模型对象的采集值,并展示	–

序号	环节	时间
1	安装和配置	约4h
2	通信调试	约0.5h
3	三遥调试及数据核对	1~2h
4	遥控实验和故障实验	约0.5h
5	消缺	约0.5h

序号	环节	时间
1	三遥配置	约1h
2	三遥调试及数据核对	1~2h
3	遥控实验	约0.5h
4	消缺	约0.5h