| [1] |
DAVIN T, PELLE J, HARMAND S, et al. Experimental study of oil cooling systems for electric motors[J]. Applied Thermal Engineering, 2015,75:1-13.
|
| [2] |
FAWZAL A S, CIRSTEA R M, GYFTAKIS K N, et al. Fan performance analysis for rotor cooling of axial flux permanent magnet machines[J]. IEEE Transactions on Industry Applications, 2017, 53(4):32953304.
|
| [3] |
KIM C, LEE K S, YOOK S J. Effect of air-gap fans on cooling of windings in a large-capacity,high-speed induction motor[J]. Applied Thermal Engineering, 2016,100:658-667.
|
| [4] |
MIZUNO S, NODA S, MATSUSHITA M, et al. Development of a totally enclosed fan-cooled traction motor[J]. IEEE Transactions on Industry Applications, 2013, 49(4):1508-1514.
doi: 10.1109/TIA.2013.2256872
|
| [5] |
SATRÚSTEGUI-DE LEGARRA M. Thermal and hydraulic design of water based cooling systems for electrical machines[D]. Pamplona: Universidad de Navarra, 2017.
|
| [6] |
LINDH P, PETROV I, JAATINEN-VÄRRI A, et al. Direct liquid cooling method verified with an axialflux permanent-magnet traction machine prototype[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8):6086-6095.
doi: 10.1109/TIE.41
|
| [7] |
ZHANG Bo, SEIDLER T, DIERKEN R, et al. Development of a yokeless and segmented armature axial flux machine[J]. IEEE Transactions on Industrial Electronics, 2016, 63(4):2062-2071.
|
| [8] |
张世斌. 深井救灾排水系统潜水电机内流体流动与温升特性研究[D]. 北京: 中国矿业大学, 2018.
|
|
ZHANG Shibin. Research on fluid flow and heat transfer characteristics of submersible motor from relief drainage system in deep well[D]. Beijing: China University of Mining and Technology, 2018.
|
| [9] |
JANKOWSKI T A, PRENGER F C, HILL D D, et al. Development and validation of a thermal model for electric induction motors[J]. IEEE Transactions on Industrial Electronics, 2010, 57(12):4043-4054.
doi: 10.1109/TIE.2010.2043044
|
| [10] |
李伟力, 付敏, 周封, 等. 基于流体相似理论和三维有限元法计算大中型异步电动机的定子三维温度场[J]. 中国电机工程学报, 2000, 20(5):15-18,22.
|
|
LI Weili, FU Min, ZHOU Feng, et al. Calculation of 3D stator temperature field of large and medium scale asynchronous motor on the basis of theory of fluid similarity and 3D FEM[J]. Proceedings of the CSEE, 2000, 20(5):15-18,22.
|
| [11] |
鲍晓华, 吕强, 王瑞男, 等. 大型高压干式潜水电机定子三维温度场有限元分析[J]. 大电机技术, 2011(6):8-12.
|
|
BAO Xiaohua, LÜ Qiang, WANG Ruinan, et al. Calculation of stator 3D temperature field for large-size high-voltage dry submersible motor[J]. Large Electric Machine and Hydraulic Turbine, 2011(6):8-12.
|
| [12] |
鲍晓华, 方勇, 程晓巍, 等. 基于三维有限元的大型充水式潜水电机端部涡流损耗[J]. 电工技术学报, 2014, 29(7):83-89.
|
|
BAO Xiaohua, FANG Yong, CHENG Xiaowei, et al. 3D finite element method analysis of eddy current losses in the end region of large water filling submersible motor[J]. Transactions of China Electrotechnical Society, 2014, 29(7):83-89.
|
| [13] |
韩继超. 大型汽轮发电机端部区域流体流动状态与热交换机理的研究[D]. 哈尔滨: 哈尔滨理工大学, 2015.
|
|
HAN Jichao. Research on fluid flow state and heat exchange mechanism in large turbogenerator end region[D]. Harbin:Harbin University of Science and Technology, 2015.
|
| [14] |
ZHAO Meng, RAN Xiaohe, SHANG Jing. Influences of 3D fluid field for submersible permanent magnet motors on thermal field distribution[C]// 2019 22nd International Conference on Electrical Machines and Systems(ICEMS). IEEE: 1-5.
|
| [15] |
ZHANG Shibin, ZHENG Xiaowen, FENG Lijie, et al. The design and experimental research of cooling structure in deep well submersible motor[J]. Journal of Discrete Mathematical Sciences and Cryptography, 2016, 19(3):838-848.
|
| [16] |
XU Yongming, LIU Fei, ZHANG Fang. Analysis of heat transfer based on fluid network decoupling in submersible motor[C]// 2015 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD). IEEE,2015:81-82.
|
| [17] |
李伟力, 李守法, 谢颖, 等. 感应电动机定转子全域温度场数值计算及相关因素敏感性分析[J]. 中国电机工程学报, 2007, 27(24):85-91.
|
|
LI Weili, LI Shoufa, XIE Ying, et al. Stator-rotor coupled thermal field numerical calculation of induction motors and correlated factors sensitivity analysis[J]. Proceedings of the CSEE, 2007, 27(24):85-91.
|
| [18] |
HUANG Xuzhen, TAN Qiang, LI Liyi, et al. Winding temperature field model considering void ratio and temperature rise of a permanent-magnet synchronous motor with high current density[J]. IEEE Transactions on Industrial Electronics, 2016, 64(3):2168-2177.
doi: 10.1109/TIE.2016.2625242
|
| [19] |
KOU Baoquan, HUANG Xuzhen, WU Hongxing, et al. Thrust and thermal characteristics of electromagnetic launcher based on permanent magnet linear synchronous motors[J]. IEEE Transactions on Magnetics, 2008, 45(1):358-362.
doi: 10.1109/TMAG.2008.2008883
|
| [20] |
STATON D, BOGLIETTI A, CAVAGNINO A. Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors[J]. IEEE Transactions on Energy Conversion, 2005, 20(3):620-628.
doi: 10.1109/TEC.2005.847979
|
| [21] |
LIANG Peixing, PEI Yulong, CHAI Feng, et al. Equivalent stator slot model of temperature field for high torque-density permanent magnet synchronous in-wheel motor[C]// International Conference on Electrical Machines & Systems. IEEE,2014:3457-3462.
|
), BAO Xiaohua1(
