Journal of Electrical Engineering ›› 2017, Vol. 12 ›› Issue (11): 41-45.doi: 10.11985/2017.11.007
Zhang Bo,Liu Chengguo,Xu Zhong,Lin Tao
Received:
2017-06-29
Online:
2017-11-25
Published:
2017-11-25
CLC Number:
Bo Zhang,Chengguo Liu,Zhong Xu,Tao Lin. Research on Improving the Recognition Rate of GIS Ultrasonic Discharge Signal by Wavelet Denoising[J]. Journal of Electrical Engineering, 2017, 12(11): 41-45.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
Tab.1
Part characteristic parameters’ values of needle-plate discharge before de-noising"
M | SD | MAD | S | K | 1N | 2N |
---|---|---|---|---|---|---|
-0.007 113 | 0.027 83 | 0.019 56 | 0.009 2 | 5.809 2 | 410.5 | 4.064 |
-0.007 141 | 0.022 47 | 0.016 54 | 0.012 8 | 5.430 4 | 351.2 | 3.332 |
-0.007 174 | 0.024 70 | 0.017 06 | 0.010 6 | 7.378 1 | 363.1 | 3.637 |
-0.007 276 | 0.028 23 | 0.020 85 | 0.006 5 | 4.480 6 | 433.4 | 4.122 |
-0.007 382 | 0.029 07 | 0.020 88 | 0.036 2 | 7.626 7 | 437 | 4.237 |
Tab.2
Part characteristic parameters’ values of suspended metal particles discharge before de-noising"
M | SD | MAD | S | K | 1N | 2N |
---|---|---|---|---|---|---|
-0.006 623 | 0.020 12 | 0.015 11 | 0.010 2 | 4.706 5 | 322.3 | 2.992 |
-0.006 675 | 0.019 87 | 0.015 58 | 0.004 5 | 3.502 8 | 327.7 | 2.962 |
-0.006 759 | 0.020 10 | 0.015 75 | 0.004 7 | 3.466 4 | 332.9 | 3.013 |
-0.006 646 | 0.023 14 | 0.018 2 | 0.005 7 | 3.678 2 | 376.5 | 3.404 |
-0.006 659 | 0.020 76 | 0.015 62 | 0.018 2 | 3.538 4 | 330.6 | 2.983 |
Tab.3
Part characteristic parameters’ values of insulator surface discharge before de-noising"
M | SD | MAD | S | K | 1N | 2N |
---|---|---|---|---|---|---|
-0.006 686 | 0.019 5 | 0.013 61 | 0.022 | 6.414 0 | 297 | 2.982 |
-0.006 738 | 0.019 07 | 0.014 80 | 0.013 2 | 5.205 0 | 304 | 2.928 |
-0.006 812 | 0.020 25 | 0.014 | 0.014 0 | 5.704 3 | 321 | 3.012 |
-0.006 801 | 0.020 09 | 0.014 57 | 0.026 4 | 6.685 2 | 311 | 2.997 |
-0.006 735 | 0.016 21 | 0.011 22 | 0.074 2 | 12.353 6 | 259 | 2.49 |
Tab.4
Part characteristic parameters’ values of needle-plate discharge after de-noising"
M | SD | MAD | S | K | 1N | 2N |
---|---|---|---|---|---|---|
-0.007 112 | 0.017 31 | 0.009 25 | 0.017 7 | 10.548 3 | 253.6 | 2.640 |
-0.007 142 | 0.012 02 | 0.006 518 | 0.028 2 | 13.766 8 | 204.5 | 1.982 |
-0.007 171 | 0.014 5 | 0.007 247 | 0.015 1 | 16.224 4 | 223.1 | 2.329 |
-0.007 272 | 0.017 07 | 0.010 09 | 0.016 1 | 7.705 2 | 262.5 | 2.627 |
-0.007 388 | 0.018 31 | 0.009 959 | 0.073 4 | 19.495 5 | 261.2 | 2.791 |
Tab.5
Part characteristic parameters’ values of suspended metal particles discharge after de-noising"
M | SD | MAD | S | K | 1N | 2N |
---|---|---|---|---|---|---|
-0.006 632 | 0.009 65 | 0.005 391 | 0.011 3 | 13.477 4 | 176 | 1.659 |
-0.006 675 | 0.008 692 | 0.005 415 | 0.000 9 | 7.856 5 | 174.2 | 1.56 |
-0.006 752 | 0.008 922 | 0.005 648 | 0.014 1 | 7.733 4 | 178.2 | 1.582 |
-0.006 646 | 0.011 42 | 0.007 255 | 0.011 2 | 8.442 4 | 199.2 | 1.879 |
-0.006 657 | 0.008 771 | 0.005 42 | 0.080 8 | 8.810 1 | 174.2 | 1.555 |
Tab.6
Part characteristic parameters’ values of insulator surface discharge after de-noising"
M | SD | MAD | S | K | 1N | 2N |
---|---|---|---|---|---|---|
-0.006 66 | 0.009 93 | 0.004 99 | 0.090 | 18.070 | 178 | 1.65 |
-0.006 73 | 0.009 68 | 0.005 11 | 0.061 | 13.278 | 180 | 1.65 |
-0.006 84 | 0.010 08 | 0.005 41 | 0.019 | 19.182 | 181 | 1.78 |
-0.006 83 | 0.010 38 | 0.005 12 | 0.048 | 20.823 | 180 | 1.75 |
-0.006 741 | 0.008 415 | 0.003 388 | 0.2235 | 50.5528 | 1595 | 1.523 |
[1] | 高凯, 倪浩, 杨凌辉 . GIS局部放电检测的技术发展和分析[J]. 华东电力, 2012,40(8):1384-1387. |
Gao Kai, Ni Hao, Yang Linghui . GIS partial discharge testing technology development and analysis[J]. East China Electric Power, 2012,40(8):1384-1387. | |
[2] | 邱毓昌 . GIS装置及其绝缘技术[M]. 北京: 水利电力出版社, 1994: 34-89. |
[3] | 谭向宇, 杨卓, 赵现平 , 等. GIS内金属性缺陷引起的局部放电超声信号分布特性研究[J]. 高压电器, 2012,48(12):65-69. |
Tan Xiangyu, Yang Zhuo, Zhao Xianping , et al. Ultrasonic signal distribution characteristics of partial discharge due to metallic defects in GIS[J]. High Voltage Apparatus, 2012,48(12):65-69. | |
[4] | 刘君华, 吴晓春, 徐敏骅 . 超高频与超声波法在GIS局部放电现场检测中的应用研究[J]. 华东电力, 2011,39(12):2096-2099. |
Liu Junhua, Wu Xiaochun, Xu Minhua . Application research on on-line detection of GIS partial discharge based on ultrahigh frequency method and ultrasonic method[J]. East China Electric Power, 2011,39(12):2096-2099. | |
[5] | 张晓星, 唐炬, 孙才新 , 等. 一种基于线性鉴别分析的GIS局部放电模式识别[J]. 重庆大学学报, 2006,29(10):1-4. |
Zhang Xiaoxing, Tang Ju, Sun Caixin , et al. PD pattern recognition based on linear discriminant analysis in GIS[J]. Journal of Chongqing University, 2006,29(10):1-4. | |
[6] |
胡云鹏, 陈焕新, 周诚 , 等. 基于小波去噪的冷水机组传感器故障检测[J]. 华中科技大学学报(自然科学版), 2013,41(3):16-19.
doi: 10.1007/s11596-006-0614-4 pmid: 17357488 |
Hu Yunpeng, Chen Huanxin, Zhou Cheng , et al. Chiller sensor fault detection using wavelet de-noising[J]. J. Huanzhong Univ. of Sci. & Tech. (Natural Science Edition), 2013,41(3):16-19.
doi: 10.1007/s11596-006-0614-4 pmid: 17357488 |
|
[7] |
王立地, 朱楠, 韩春成 . 小波去噪在动态负荷建模实测信号中的应用[J]. 电测与仪表, 2010,47(9):18-21.
doi: 10.1038/s41598-019-55333-1 pmid: 31836756 |
Wang Lidi, Zhu Nan, Han Chuncheng . Application of wavelet denoising on measurement signals of dynamic load model[J]. Electrical Measurement & Instrumentation, 2010,47(9):18-21.
doi: 10.1038/s41598-019-55333-1 pmid: 31836756 |
|
[8] |
邱选兵, 魏计林, 崔小朝 , 等. 异构双核构架下的脉冲涡流信号实时小波去噪[J]. 计算机应用, 2013,33(3):866-870.
doi: 10.3724/SP.J.1087.2013.00866 |
Qiu Xuanbing, Wei Jilin, Cui Xiaozhao , et al. Real-time wavelet denoising for pulsed eddy current signal based on heterogeneous dual-core[J]. Journal of Computer Applications, 2013,33(3):866-870.
doi: 10.3724/SP.J.1087.2013.00866 |
|
[9] | 张燕, 倪远平 . 基于AdaBoost.M2-NN的变压器故障诊断[J]. 甘肃科学学报, 2012,24(1):97-101. |
Zhang Yan, Ni Yuanping . Fault diagnosis of transformer based on adaBoost. M2-NN[J]. Journal of Gansu Sciences, 2012,24(1):97-101. | |
[10] |
周英, 尹邦德, 任铃 , 等. 基于BP神经网络的电网短期负荷预测模型研究[J]. 电测与仪表, 2011,48(2):68-71.
doi: 10.1038/s41598-019-55333-1 pmid: 31836756 |
Zhou Ying, Yin Bangde, Ren Ling , et al. Study of electricity short-term load forecast based on BP neural network[J]. Electrical Measurement & Instrumentation, 2011,48(2):68-71.
doi: 10.1038/s41598-019-55333-1 pmid: 31836756 |
|
[11] | 彭湘陵 . 基于BP_Adaboost和HMM的湖南方言识别方法研究[D]. 长沙:湖南师范大学, 2012. |
[1] | HUANG Yong, WANG Kehong, ZHOU Xiaoxiao. Translation Invariant Wavelet De-noising of CO2 Gas Shielded Arc Welding Electrical Signal [J]. Journal of Mechanical Engineering, 2018, 54(8): 95-100. |
[2] | Guo Xu,Mu Jiqing,Wang Qingjun,Yong Mingchao,Wang Weijie,Mao Lina. Power Phase Based on PD Detection Method in the Three-Phase Cylindrical GIS [J]. Journal of Electrical Engineering, 2018, 13(4): 46-52. |
[3] | SUN Dianzhu, GUO Hongshuai, LI Yanrui, NIE Lekui. Method of Rigid Registration Based on Poisson Reconstruction of Local Sample Points [J]. Journal of Mechanical Engineering, 2018, 54(15): 141-149. |
[4] | ZHANG Qiushuang, JIN Xin, ZHANG Zhongqing, ZHANG Zhijing, SHANG Ke. Assembly Method Based on Constrained Surface Registration [J]. Journal of Mechanical Engineering, 2018, 54(11): 70-76. |
[5] | Jia Gengfeng,Li Jun,Jiang Xiaoxu,Zhi Xiao,Guo Yujing,Yan Jianxin. The Analysis of Expansion Amount Calculation of Thermal Compensation Bellows for GIS Busbar [J]. Journal of Electrical Engineering, 2017, 12(6): 36-40. |
[6] |
LIU Qun, REN Jindong, ZHANG Qian, HUA Meng.
Research on Driver Seated Reach Capability with Consideration of Difficulty [J]. Journal of Mechanical Engineering, 2016, 52(14): 125-133. |
[7] | ZHOU Shaoping, ZHANG Pugen, LÜ Wenchao, HAO Zhanfeng. Detection of Cracks in Elbow Pipes Using Guided Waves [J]. Journal of Mechanical Engineering, 2015, 51(6): 58-65. |
[8] | LIU Shanhui, MEI Xuesong, LI Jian, HE Kui, WEN Qing. Design Feedforward Active Disturbance Rejection Control Controller for Multi-color Register System [J]. Journal of Mechanical Engineering, 2015, 51(5): 143-150. |
[9] | QU Ting, ZHANG Kai, LUO Hao, WANG Zongzhong, JIA Dongyuan, CHEN Xin, HUANG George Q, LI Xiaomin. Internet-of-things based Dynamic Synchronization of Production and Logistics:Mechanism, System and Case Study [J]. Journal of Mechanical Engineering, 2015, 51(20): 36-44. |
[10] | WENG Weibing;SHAO Juping. Logistics Planning Optimization for Strategic Alliance Supply Chain under Multiple Uncertainty [J]. , 2014, 50(4): 192-202. |
[11] | LIU Shenglan;ZHANG liyan;WANG Xiaofei. A Shape Registration Method Considering the Regional Difference in Precision [J]. , 2013, 49(13): 139-144. |
[12] | ZHANG Xudong;WU Guosong;HU Liangmei;WANG Zhumeng. Adjacent Scatter Point Cloud Registration Technology Research Based on Three-dimensional Camera of Time of Flight [J]. , 2013, 49(12): 8-16. |
[13] | QIN Xujia;WANG Jianqi;ZHENG Hongbo;LIANG Zhenhua. Point Clouds Registration of 3D Moment Invariant Feature Estimation [J]. , 2013, 49(1): 129-134. |
[14] | LI Guo;MA Shihua;GONG Fengmei;WANG Zhaohua. Research Reviews and Future Prospective of Collaborative Operation in Supply Logistics Based on Supply-Hub [J]. , 2011, 47(20): 23-33. |
[15] | CHEN Baojia;CHEN Xuefeng;LI Bing;CAO Hongrui;CAI Gaigai;HE Zhengjia. Reliability Estimation for Cutting Tool Based on Logistic Regression Model [J]. , 2011, 47(18): 158-164. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||