Research on Electrostatic Field Influencing Factors in Surface Dielectric Barrier Discharge Based on Finite Element Simulation

doi:10.11985/2017.07.004

Abstract

Abstract:

Surface dielectric barrier discharge (SDBD) can produce low temperature plasma at atmospheric pressure, which is in large area and has high energy density. In order to improve discharge characteristics of SDBD, optimize the structure design, taking a cylinder surface discharge reactor as the object, this paper simulate and analysis the surface dielectric barrier discharge device by using finite element analyzing soft. Research the influence of excitation voltage, high voltage electrode wire diameter, dielectric thickness and relative permittivity on SDBD device.

Key words: Surface dielectric barrier discharge, discharge characteristics, electric field analysis, structural optimization

CLC Number:

TM854

Liang Lijuan,Wu Xiaozhao,Xu Tong, . Research on Electrostatic Field Influencing Factors in Surface Dielectric Barrier Discharge Based on Finite Element Simulation[J]. Journal of Electrical Engineering, 2017, 12(7): 22-25.

Figures/Tables 7

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

References 13

[1]	袁大陆 . 全国电力系统高压开关设备10年运行状况述评[J]. 电力设备, 2000,1(1):29-34.
	Yuan Dalu . The commentary on the state of HV switchgear in the national electricity system for ten years[J]. Electrical Equipment, 2000,1(1):29-34.
[2]	Shao T, Yan P, Long K , et al. Dielectric-barrier discharge excitated by repetitive nanosecond pulses in air at atmospheric pressure[J]. IEEE Transactions on Plasmaence, 2008,36(4):1358-1359.
[3]	李雪辰, 赵欢欢, 贾鹏英 , 等. 常压空气中大间隙介质阻挡放电特性[J]. 高电压技术, 2013,39(4):876-883.
	Li Xuechen, Zhao Huanhuan, Jia Pengying , et al, Large-gap dielectric barrier discharge characteristics at pressure air[J]. High Volage Engineering, 2013,39(4):876-883.
[4]	Voeten S J, Beckers F, van Heesch E, et al. Optical characterization of surface dielectric barrier discharge[J]. IEEE Transactions on Plasmaence, 2011,39(11):2142-2143.
[5]	李清泉, 许光可, 房新振 , 等. 沿面型介质阻挡放电的数值仿真计算[J]. 高电压技术, 2012,38(7):1548-1555.
	Li Qingquan, Xu Guangke, Fang Xinzhen , et al. Numerical simulation of surface dielectric barrier discharge[J]. High Voltage Engineering, 2012,38(7):1548-1555.
[6]	周泽存, 沈其工, 方瑜 , 等. 高电压技术[M]. 北京: 中国电力出版社, 2007: 62-92.
[7]	潘俊, 方志 . 多脉冲均匀介质阻挡放电特性的仿真及实验研究[J]. 高电压技术, 2012,38(5):1132-1140.
	Pan Jun, Fang zhi . Simulationg and experimental research on characteristics of multi-pulse uniform dielectric barrier discharge[J]. High Voltage Engineering, 2012,38(5):1132-1140.
[8]	鲁大勇, 李鹏飞, 荐波涛 . 绝缘局部放电特征量提取与模式识别研究[J]. 电气应用, 2016,35(8):74-79.
[9]	Jiutao An, Kefeng Shang, Na Lu , et al. Oxidation of mercury by active species generated from a surface dielectric discharge plasma reactor[J]. Plasma Chemistry and Plasma Processing, 2014,34(1):217-228.
[10]	Jiang Nan, Lu Na, Shang Kefeng , et al. Innovative approach for benzene degradation using hybrid/packed-bed discharge plasma[J]. Environmental Sciences & Technology, 2013,47(17):9898-9903.
[11]	中国电器工业协会, 全国高压开关设备标准化技术委员会. GB11022—1999 高压开关设备和控制设备标准的公用技术要求[S]. 北京: 中国标准出版社, 1999.
[12]	包博, 谢天喜 . 750 kV高压电抗器笼式出线结构均压特性研究[J]. 电网技术, 2011,35(5):232-236.
	Bao Bo, Xie Tianxi . Voltage sharing characteristics of cage outgoing line structure for HV reactors in 750kV power grid[J]. Power System Technology, 2011,35(5):232-236.
[13]	潘浩, 殷庆铎, 高文胜 . 固体绝缘中气隙尺寸对局部放电过程的影响[J]. 高电压技术, 2008,34(3):458-461.
	Pan Hao, Yin Qingduo, Gao Wensheng . Influence of void dimensions on partial discharge in solid insulation[J]. High Voltage Engineering, 2008,34(3):458-461.

[1]	BI Xiangjun, CHEN Bingquan, WU Hao, WANG Lipeng, JIANG Liangliang, WANG Bo, ZHOU Caihua. Design, Analysis and Optimization of Linear Bundled Separation Device for Launch Vehicle [J]. Journal of Mechanical Engineering, 2019, 55(14): 60-68.
[2]	Mingyi Wang, Liyi Li, and Rui Yang. Overview of Thrust Ripple Suppression Technique for Linear Motors [J]. Chinese Journal of Electrical Engineering, 2016, 2(1): 77-84.
[3]	WU Zijun, HUANG Zhengdong, ZUO Bingquan, LIU Qinghua, YIN Xiaoliang. Perspectives on Isogeometric Analysis [J]. Journal of Mechanical Engineering, 2015, 51(5): 114-129.
[4]	WANG Bo, LIU Xianli, LIU Jingshi, JI Wei, ZHAI Yuansheng, LIANG Weiyan. Structural Optimization and Manufacturing for Region of High Stress of Pelton Turbine [J]. Journal of Mechanical Engineering, 2015, 51(21): 148-155.
[5]	LIU Yanjie, WU Mingyue, WANG Gang, CAI Hegao. Method for Structural Optimization Design of Wafer Handling Robot Arms [J]. Journal of Mechanical Engineering, 2015, 51(1): 1-9.
[6]	XIA Hongjian;ZHANG Jiwei;CHEN Xindu. Solution for Shape and Topology Optimization of Continuum Structures on CAD System [J]. , 2014, 50(23): 147-155.
[7]	ZHAO Jianshe;;WANG Feng;;XIAO Xiong;;LI Long. Experiment Research on Electrochemical Machining of Meso Scale Arc-shaped Multi-grooves [J]. , 2014, 50(23): 186-193.
[8]	YANG Rui;LIU Yang;QIAN Wei;YANG Xuyin. Topology Optimization for Structural Design of Fuselage Flutter Model [J]. , 2011, 47(11): 59-63.
[9]	LI Feng;MENG Guangwei;ZHOU Zhenping;ZHOU Liming. Robust Design of Structural Fatigue Life [J]. , 2010, 46(2): 155-158.
[10]	HUANG Jing;ZHONG Zhihua;HU Lin;LIU Dihui. Protecting Performance Analysis and Structural Optimization of a Sandwiched Tube-type Airbag [J]. , 2009, 45(6): 107-112.
[11]	GAO Tong;ZHANG Weihong;ZHU Jihong;TANG Xinggang. Evolutionary Static Topology Optimization of Cyclic-symmetry Structures [J]. , 2008, 44(3): 166-172.
[12]	CHEN Shuxun　WANG Sunuan　BAI Bin;YING Honglie　TANG Yong. Load Expression and Structural Optimization of Compressed Rubbish Vehicle [J]. , 2008, 44(3): 213-219.
[13]	LI Shuo;XU Yuanming;ZHANG Jun. NEURAL NETWORK RESPONSE SURFACE OPTIMIZATION DESIGN FOR COMPOSITE STIFFENED STRUCTURES [J]. , 2006, 42(11): 115-119.
[14]	Teng Hongfei;Zeng Wei;Liang Dawei;Sun Zhiguo Liu Jun;Li Guangqiang. EVOLUTIONARY DESIGN METHOD AND ITS APPLICATION [J]. , 2004, 40(1): 1-6.
[15]	Lu Jianwei;Zhang Xianmin;Shen Yunwen. INTEGRATED STRUCTURAL AND NOISE CONTROL DESIGN FOR ELASTIC LINKAGE MECHANISM [J]. , 2003, 39(3): 40-43.